- Phone:513.772.0060
- Address:7205 Edington Dr. Cincinnati, OH 45249
The eFlo Inline Meter is designed to display current and totalized gas flow. With simple compatibility with existing controls, tracking gas flows has never been easier. Designed for use in the harshest industrial environments, eFlo Inline Gauge Meter allows for seamless integration into existing systems.
| Digital display with easy-to-use keypad and optional touchscreen |
| Pressure and temperature compensation for precise flow calculation |
| Easy retrofit for existing flow measuring equipment |
| Flow calibration can be certified while in use to meet CQI-9 requirements |
| NIST-traceable calibration |
| SCADA Integration: Current Flow, Totalized Flow, Cost Calculation |
| Built-in high/low flow alarms |
| Current and totalized flow indication |
| Analog feedback for data acquisition |
| Integrated comms via Modbus over RS485, Ethernet, and USB |
| Mobile-friendly and web-based remote configuration |
| Two pipe sizes: 1 1/4″, 2″ |
| Natural Gas |
| Air |
| Nitrogen |
| Endothermic Gas |
| Ammonia |
| Other Industrial Gases |
| Power Required: | 24VDC @ 400mA |
| Accuracy: | ±4% |
| Gas Temp. Limits: | 32°F to 150°F (0°C to 65.6°C) |
| Ambient Temp. Limits: | 32°F to 150°F (0°C to 65.6°C) |
| Flow Output Signal (Linear): | 4-20mA |
| Max. Output Signal Load: | 500Ω |
| Response Time: | 1 – 10 seconds |
| Communications: | RS485, Ethernet, USB |
| Communications Protocol: | Modbus RTU/TCP |
| Flow Meter Pressure Limits: | 5 psig max. (Standard) |
| Pipe Fitting | 1 1/4″ or 2″ NPT |
